Software Tools

All Software Tools are available in Adobe PDF format.
Obtain the free Adobe Reader:
521 KB : EXE File | Revision: 1.02 | 12/12/2011

CRC Signature Verification

This application will verify the CRC of a program

2.34 MB : ZIP File | Revision: | 02/08/2010

DBV300Cab300(S08)

This program is used to adjust the sensors on DBV30x model validators

52 KB : Zip File | Revision: v2.07 | 09/18/2005

DWN03

This app is used to force download the DBV-3XX. When downloading DBV-3XX using PSP03 Program Download and process was interrupted while in download process, firmware in the unit will be corrupted. Must use force download application to re-flash unit.

2 MB : ZIP File | Revision: 2.00.020 | 12/17/2014

FLI Downloader

GEN2 Downloader Application

786 kB : ZIP File | Revision: v1.6 | 03/01/2009

ID003 Basic Driver v1.6

This application allows the complete communications testing of a JCM Validator using a PC as a host. This version allows selection of the com port. See the Basic Driver Documentation for details.

2 MB : ZIP File | Revision: 2.01 | 04/29/2015

ID003 Basic Driver v2.01

This application allows the communication testing of JCM Validators and JCM Banknote Recycler units using a PC as a Host. NOTE: This version Basic Driver is not compatible with the UBA, DBV-30x or PUB Validators.

3.83 MB : ZIP File | Revision: v2.01 | 02/14/2011

ID024 Basic Driver

This application allows the complete communications testing of a JCM Validator using a PC as a host. This application is specific to the ID024 protocol. See the Basic Driver Documentation for details on running and using the Basic Driver program

18 MB : ZIP File | Revision: 2.2.10 | 06/28/2017

JCM DFU Downloader for GEN2U, GEN3, GEN5, KBM60

GEN2U, GEN3, GEN5, KBM60 Downloader Application. Ensure the GEN2U jumper connecting pins 2 to 3 is installed in the 4 pin connector by the USB Download port or an Upgrade Key is available, for the first time download of a GEN2U printer.

2 MB : ZIP File | Revision: 1.05 | 12/02/2016

JCM Printer Driver

This application allows functional testing of the GEN2, GEN2U and GEN5 printers as well as viewing sensor and status conditions.

26 MB : ZIP File | Revision: 1.40 | 05/05/2017

JCM Tool Suite

This version of JCM Tool Suite supports Windows 10 installation as well as older supported versions of Windows. This utility combines the capability to Download, Calibrate and view Acceptance information from the front USB port on all models of the UBA, iVIZION, iPRO, TBV, EBA-40, DBV-400 and DBV-500. Performance testing is also available for most units.

433 KB : ZIP File | Revision: v3.40 | 09/18/2005

Palm A-66

View the currently installed software in the A-66 coin changer and to diagnose the unit.

63 KB : ZIP File | Revision: v4.10 | 09/18/2005

Palm Flash

This application is used only for loading software or to change the software on A-66 coin changer.

26 KB : ZIP File | Revision: v1.40 | 09/18/2005

Palm Stat

Tap on the upper left corner of the PALM and choose “See Data” to browse on the captured data from the coin changer.

38 KB : ZIP File | Revision: v3.4.0 | 08/08/2006

PSP-04

If a program download failed before completing the download, you must use DWN-03 and set the dip switches to be able to re-download the software to the unit. The DWN-03 firmware application information contains the dip switch settings.

8.8 MB : ZIP File | Revision: v1.0.30 | 02/21/2014

Sentry 2 Application

Sentry 2 Maintenance Application

2.26 MB : ZIP File | Revision: v1.0.12 | 08/11/2009

TicketCop: Barcode Evaluation Software

Intended to aid barcode ticket designers in making tickets with high acceptance in JCM acceptor equipment. This software tests tickets in 5 important ways: Barcode Value, Length, Amplitude Level, Low Transparency Point, High Transparency Point.

4.22 MB : ZIP File | Revision: v3.02 | 03/18/2008

UBA Downloader (Vista Compatible)

This application will download a data file from a PC to the UBA validator for software upgrade purposes.

1007 KB : ZIP File | Revision: v1.2 | 10/25/2007

UBA Installer

This application will upload the data files from a PC to a PocketPC for software installation to the UBA validator.

373 KB : ZIP File | Revision: v1.19 | 03/18/2008

UBA, WBA AccLoad

This application can be used to view acceptance and denomination information from the UBA-10 and WBA 12/13 bill acceptors.

204 KB : ZIP File | Revision: v1.04 | 12/22/2009

Version Check

This program allows the user to read the version of software currently loaded in the bill validator. Set the baud rate on the validator with the dip switches and select com port and baud rate in the program.